...correct DB - 9 RS - 232 cable with female DB - 9 connector . RS - 232 cable is used for connecting a terminal or terminal emulator to the Managed Switch’s RS - 232 port to access the command - line interface . Attach the DB - 9 serial port on th...
Figure 3 . Cable connections to the power injector . LPJ001A - T 802.3at PoE Gigabit Injector , 1 - Port ® BLACK BOX Exceeds the 802.3at standard . Use with IP telephones , wireless access points , IP print servers , IP cameras , ® and Bluetooth acc...
...installed and used according to the instructions in this manual , together with the specified cables and the maximum cable length < 3m , the Units : ACS2009A - R2 - MM , ACS2009A - R2 - SM , ACS2209A - R2 - MM , ACS2209A - R2 - SM ACS4001A - R2 -...
...that is , in strict accordance with the manufacturer’s instructions , may cause interference to radio communication . It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Su...
...cm ) via connected cable harness Maximum Distance between Transmitter and Receiver 328 ft . ( 100 m ) , use a network switch to get farther distances Operating System Support Microsoft Windows ® Vista , XP , Windows 7 , Windows 8 , Windows 10 ,...
...are installed . USB cable . Computer 1 . Place the units where desired , and connect the CAT5 extension link cabling to the link ports ( RJ - 45 ) on the Local Extender and the Remote Extender . Figure QS - 2 . Connecting the Local Extender to t...
...installed and used according to the instructions in this manual , together with the specified cables and the maximum cable length < 3m , the Units : ACS1009A - MM , ACS2209A - MM ACS4001A - MM , ACS4201A - MM ACS1009A - SM , ACS2209A - SM ACS4001...
...verify that the HDMI cable used is of high quality . This is particularly important for 4K 60 Hz , which requires a premium HDMI cable . 4.1.2.2 ASSIGNING A NEW SOURCE TO A SINGLE DECODER ( RX ) To assign a new source to a decoder ( RX ) , repeat...
...end of a DisplayPort cable to the DisplayPort port on the source device ( e.g . computer , server , or other IT device ) . Then connect the other end to the DP IN port located on the TX unit . 3 . Connect the DisplayPort display to the DP OUT por...
Quotation Basket
Sign in
Contact Us
