HDMI-over-IP Extender MediaCento IPX HD

HDMI HD video over IP
This IP-based audio/video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI HD video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load. You need just one transmitter for every AV source and one receiver for each screen.

MediaCento IPX HD is great for:

• Digital Signage applications using the iCOMPEL Digital Signage system.
• Basic HDMI video and audio extension direct point to point, or point to multipoint over a gigabit *Ethernet network.
• Streaming video to classrooms in schools.
• Corporate video sharing and training.
• Sharing video in command and control room setups.

HD means better video
The MediaCento IPX HD supports High Definition video for great pictures up to 1080p.

Plug-and-play setup
Whether you choose to utilize existing LAN infrastructure, or setup a dedicated video network, setup is easy. For a point-to-point extension (unicast setup), simply connect your source to a MediaCento transmitter, your display to a MediaCento receiver, and link both over a network switch, and you're ready go!

PoE support for remote powering
The MediaCento IPX HD is PoE powered eliminating the need for additional power supplies. Using a PoE network switch completely eliminates the need for external power supplies making installation easier and cost-efficient.

Multicasting video one-to-many or many-to-many
MediaCento IPX HD supports allows you easy system expansion at your own path. Share content on multiple screens just by connecting each screen through a MediaCento receiver to your video network. You can also add additional sources each connected via a MediaCento transmitter. For Multicasting, all MediaCento units need to be connected via the same network switch. To control a swithing matrix, you will also require a Media Cento Controller unit.

Create 16x8 video walls
Use the configurator on the remote unit and create video walls with up to 16 x 8 displays. For video streaming and multicasting video over a network to a video wall, combine MediaCento with the standalone MediaCento Controller (VSW-MC-CTRL) and create video walls with sizes up to 8x8.

Signals that go for kilometres
The MediaCento IPX HD system transmits signals up to 100 m point to point, but goes even further with a network switch added to the mix.

Optimal PC-to-screen performance
MediaCento IPX HD features EDID copy function and is HDCP 2.2-compliant supporting also protected contents from Blu-rays.

Digital signage and video wall applications:

• Hospitality
• Bars/restaurants
• Retail
• Venues/events
• Corporate multi-room solutions

Video resolution — 1080p
DDC — DDC, DDC2. DDC2B
Extension cable — CAT5e/6 Ethernet cables up to 100m
Connectors —
Transmitter
(1) HDMI female Video Input
(1) RJ-45 Ethernet Network Port
Receiver
(1) HDMI female Video Output
(1) RJ-45 Ethernet Network Port
Audio —
Supports high-definition audio (HD) 5.1/6.1/7.1 surround sound;
Dolby TrueHD, DTS-HD Master Audio;
LPCM channels up to 7.1 channels 192 kHz
User Controls —
B1: Set/Reset Pushbutton
B2: Function Selection Pushbutton
Rotary switch: Select from 16 Video Channels (HEX 0–F), Paired TX and RX units must use the same channel
Latency (max) — 2 frames / 33ms
Indicators —
Transmitter:
Status LEDs: Power (blue), Link (blue)
Function Selection LEDs: EDID Update (blue)
Video Profile Selection (Video or graphic mode) (blue)
Receiver:
Status LEDs: Power (blue), Link (blue)
Function Selection LEDs: EDID Update (blue)
Video Profile Selection (Video or graphic mode) (blue)
— Complies with IEEE8023at Class 4
Power —
Power over Ethernet:
Complies with IEEE 802.3at standard, Class 4; Power: Normal input: 48 VDC; Input Range: 36 to 57VDC; Consumption: 10.5 W, CAT6, 100 m
External Power Supply:
5VDC, 3A, consumption 10,5W
Environmental —
Relative Humidity: 0 to 80% non-condensing
Operating Temperature: 0 to 50° C
Storage Temperature: -20 to 60° C
Dimensions —32 x 98 x 180 mm HxWxD each
Weight —0.47kg each
Housing —metal chassis

TAA compliant — YES

(1) MediaCento IPX HD unit
(1) 5-VDC, 3-A power supply
(1) Quick Start Guide